solaris 10 ndd - Topic profile

On Mon, 17 Nov 2008 09:49:14 -0800, victorfeng1973 wrote: > How can I check the real speed of a NIC in V480? > > bash-2.05$ /usr/sbin/ifconfig -a > lo0: flags=1000849 mtu 8232 index 1 > inet 127.0.0.1 netmask ff000000 > ce1: flags=1000843 mtu 1500 index 2 > inet 10.1.2.48 netmask fffff000 broadcast 10.1.15.255 > qfe0: flags=1000843 mtu 1500 index > 3...

Hi all,        We have 3 Solaris boxes (5.10) that are reporting massive amounts of collisions on the NICs. Server1 info NIC (/dev/eri) set to 100 autonegotiate - currently half-duplex. Server2 info (/dev/bge0) set to 100 autonegotiate - currently full-duplex. Server3 - same as Server2. When I try to force Server1 to use full duplex CODE # ndd -set /dev/eri adv_100hdx_cap 0 # ndd -set /...

Renee Danson writes: > > > On upgrade, previous network configuration will be imported into appropriate > > > NWAM profiles, which will be enabled upon boot. The user should not notice > > > any change to their network configuration, as the previous static configuration > > > will be replicated. > > > > This raises a key question: does this Phase of NWAM finally do away > > ...

On Sat, Sep 13, 2008 at 7:55 PM, Devin Ceartas wrote: Thanks for the tip. It doesn't work, see the output reproduced below.  # zonecfg -z citylife zonecfg:citylife> select net physical=e1000g2 zonecfg:citylife:net> set address= 192.168.0.129 zonecfg:citylife:net> end zonecfg:citylife> verify net: address cannot be specified for an exclusive IP type ...