Topic profile page for XON.
This page has aggregated data from forum posts, threads, listings, online discussions, newsgroups, messageboards, and other online sources which contain user generated content for the term: XON.
Topic "Xon" was discussed 752 times on 161 sites in last 3 months
Started 2 weeks ago (2009-10-28 04:51:00)
by siva0182
I am using agilent multifunction DAQ card to send a digital signal output. I have put the digital output vi inside a while loop and have given asmall delay of 1 msec(I have tried with higher delays also) I am using Rs232. The problem i am facing is at 9600 baud rate with flow control none the pgm works fine. But when I set to higher baud rates flow control none does not work it ...
Started 1 week, 5 days ago (2009-10-29 21:30:00)
by JasonS
I agree with Dennis that on a Windows system your jitter numbers don't really seem out of line. At the same time, if you are seeing more jitter when using Xon/Xoff flow control, I would recommend using Rts/Cts flow control instead if it is supported by your instrument. When using Xon/Xoff flow control, it is likely that every incoming byte has to be looked at by the driver (depending on...
Started 2 months ago (2009-09-10 15:19:00)
by peace4all
I have a column like this American Indian or Alaska Options XCK,XON I want to be able to insert to records for this pidm (primary key) this is how it is in the table SZSCAPL_APPLICANT_ID SZSCAPL_AMER_INDIAN_ALASKA_OPT 5666090 XCK,XON so I need to be able to extract one ROW for XCK, and another row for XON, ...
Started 2 months, 1 week ago (2009-09-03 16:04:00)
by GordonD3
I am using RB2009r3 to communicate with a serial device utilizing XOn/XOff handshaking. The device (for which I wrote the firmware) sends a lot of ASCII data (512K and greater) to the RB application at 115,200 baud. However, the received data has LOTS of dropped characters. I have checked the firmware using two different terminal emulation programs (TeraTerm and Hyperterm) and the XOn/XOff flow ...
Started 2 months, 3 weeks ago (2009-08-17 12:44:00)
by tierconit
Hello, I am dialing into a meridian switch. My terminal software is set to 9600,8,n,1,xon/xoff. The final connection is on an extension so the terminal software is configured with the main phone number plus some commas then the extension. I get an answer at the extension. You can hear the connectivity and then the response is either "connect 28800" or "connect 26400". When I press enter ...
Started 1 month ago (2009-10-09 12:43:00)
by locutus442
one of my favorite b5 quotes (from capt. sheridan): "I apologize. I'm sorry. I'm sorry we had to defend ourselves against an unwarranted attack. I'm sorry that your crew was stupid enough to fire on a station filled with a quarter million civilians, including your own people. And I'm sorry I waited as long as I did before I blew them all straight to ****! As with everything else it's the thought...
Started 1 day, 10 hours ago (2009-11-09 21:53:00)
by pat42
quote: xon schreef op maandag 09 november 2009 @ 20:07 : @pat42 Het was een gok maar ja toch betalen waarschijnlijk. Dit kan helaas nog wel eens even duren kan ik uit ervaring vertellen. Je kan inderdaad een brief krijgen waarop het uitgelegd wordt wat je moet doen. Is handwerk :-( Ja, het lijkt er wel op. Betalen had ik rekening mee gehouden (hoopte stiekem van niet natuurlijk ). ...
Started 1 day, 9 hours ago (2009-11-09 22:49:00)
by souljah1h
quote: xon schreef op maandag 09 november 2009 @ 22:33 : Zucht.... ik zou nog steeds blind gaan voor de DM3 X2 neo als die in nederland te krijgen is als je ziet wat ie in frankrijk kost wordt je echt jaloers. Toch..frankrijkt heeft geen qwerty en lijkt me daarom zo ie zo wat lastig De MV-40 klopt dus toch wel Hopelijk komt de X2 hier wel in nederland uit. Begreep dat het ...
Started 4 days, 10 hours ago (2009-11-06 21:37:00)
by FormerLurker
Quote: Originally Posted by Chaos Descending Quote: Originally Posted by FormerLurker TOS/TNG Kirk/Picard Decker/Riker Spock/Data McCoy/Crusher Uhura/Yar Sulu/Worf Scotty/Geordi Chekov/Wesley Not entirely accurate. Xon, not Spock = Data ...
Started 4 days, 23 hours ago (2009-11-06 08:46:00)
by tthtlc
On Thu, Nov 5, 2009 at 7:54 PM, James C. McPherson wrote: Peter Teoh wrote: Previous version SXCE snv_115 I don't have any compilation errors, but this version (osol 2009.06/snv 111b): cc -g -m64 -D_KERNEL_ -D_KERNEL -DSVR4 -DSOL2 -I. -.I/root/solaris/src/uts/common -xmodel=kernel -c xxxx.c Assembler: "/tmp/yabeAAAwYaO5b", line 710 : Syntax error ...
Started 5 days, 22 hours ago (2009-11-05 09:45:00)
by penpen
I think that the first two symptoms may both have to do with your $TERM, does the behavior with manpages persist inside/outside of screen? Do you have $TERM set outside of screen to vt220 (not sure if this would make a difference, but worth a shot). Otherwise, this may be an ansi vs unicode thing (just a shot in the dark, I haven't actually worked with a real vt220) As for the XON messages, it's...
Cytat: Pierwotnie zamieszczone przez Użytkownika lowolak HEJ, oczywiście byłbym zainteresowany wymianą, jeśli możesz zerknij na stronkę http://www.kapsle.xon.pl/phpBB/viewtopic.php?t=186 7 być może coś sobie wybierzesz. Pozdrawiam Art niestety pod wskazanym linkiem nie widzę Twoich kapsli
Started 4 days, 10 hours ago (2009-11-06 21:51:00)
by oli4lode
xon schreef: westermaatje schreef: http://www.thomann.de/nl/the_tmeter.html volgens mij is die iets hoger dan 1 HU..en we hebben echt 1 hu...wel erg mooi spul! Ik bied een rtw 1113 aan op marktplaats, kan je makelijk zelf voeding voor maken en in 1unit 19" inbouwen
Started 6 days, 23 hours ago (2009-11-04 09:09:00)
by xon
Quote: Originally Posted by Pottsy xon, There is no vtec "kick" in the 1.8, it uses the normal cam profile at all times, apart from light load cruising. VTEC - Civinfo Wiki Thanks for the info Pottsy.. I discoverd the wiki also (to late)...how disappointing I reallly miss some extra power ...
Started 6 days, 12 hours ago (2009-11-04 20:14:00)
by macuser09
Quote: Originally Posted by monkeyboy I believe what you are talking about is termed "machine to machine" (another M2M), and Sprint has been doing this for years... http://www.sprint.com/wholesale/m2m.shtml http://www.cio.com/article/504423/S...xon omyId=1413 Just a new use and I think Sprint is working on...
Started 1 week ago (2009-11-03 09:34:00)
by methyl
ctrl/S = XOFF (stop output to terminal). The converse is ctrl/Q = XON (start output to terminal). Thus if you type ctrl/S and the output stops, type ctrl/Q and the output will start again. Hope this helps.
