Thread: chp stroker kit

Do some searches, send some pms, emails and pick up a phone. You know your goals better than anybody else. Do your research, and then go with a kit or supplier that you are most comfortable with.

Btw I went with a scat kit

Scat 4340 and Probe slugs. Look at Scat Pro 4340 forged I beams with ARP 2000 rod bolt. Probe also makes a 4340 I beam with 7/16" rod bolt. both good to 1000fwhp. chp uses RPM crtanks, and their rods and pistions in their stroker kits. I do not like RPM stuff.

The RPM is internal balance, if that is an advantage to you. And that particular crank is pretty okay. Pretty okay is like "really good for a Chinese crank". Either one is fine.

Quote: Originally Posted by Mark O'Neal The RPM is internal balance, if that is an advantage to you. And that particular crank is pretty okay. Pretty okay is like "really good for a Chinese crank". Either one is fine. to the OP, here is the man you pm or make a phone call to!!!!!

Here is the rpm internal 4.00 inch crank, very good crank. Fit, finish, sizing is better than eagle by a long shot IMO. Call eric at chp x2907, you want 408 pro street with this crank and H beam rod. I have used dozens and dozens of these cranks without failure.

Why can't he buy it from you?

Mark tells it like it is. He would not sell things that he dosn't feel are of quality. Tim

pm mr mark right now

Quote: Originally Posted by strokeme Here is the rpm internal 4.00 inch crank, very good crank. Fit, finish, sizing is better than eagle by a long shot IMO. Call eric at chp x2907, you want 408 pro street with this crank and H beam rod. I have used dozens and dozens of these cranks without failure. ...