Thread: What fits Tecate 3's

mjquadracer. All you have to do is get a piece of aluminum plate. Drill 4 holes in it and mount the master cylinder in backwards. Just like this

Its 4x110mm. It used to be Honda's bolt pattern but it seems that many of the other manufacturers have adopted it as well. John

Quote: Originally Posted by alexandros this hubs wont fit with the tecate wheels correct? you need to find wheels 10'' for a trx 450? Oh yes, I forgot to add if you run honda hubs you will need to run Suzuki or Honda rims on the back to match the 4x100 (i think thats the bolt pattern) bolt pattern found on the hubs. Means you can run 8", 9", or 10" wheels. It actually opens up your tyre choice because the...

its a direct bolt in just ahve to trip the frame a little bit to put the spark plug cap on and make upper and front motor mounts ( going to get done in the verry near future when i can get down to the machine shop!

Quote: Originally Posted by OZQUAD44 Honda sport quad hubs fit 86, and 87 T3's. All you need to do is space out some hubs so the honda hubs don't bottom out where the kawasaki splines finish. Picture is of an 87 T3 axle fitted with TRX450R alloy extended hubs. In the photos I have installed 7mm spacers/collars in between where the hub stops and the axle starts. this hubs wont fit with the tecate wheels correct? you need to find...

got a 84-85 with no rear master cylinder, line, or caliper. Disk and pedal still intact. Anyone know a cheap replacement?

Banshee shocks bolts right in, you just need to open the bushings for the lower mount (top stock on a banshee) and mount it upside down. No clearance issues at all and almost and exact copy of the stock T3 shock, but with a much better feel...

Quote: Originally Posted by i58829 Banshee shocks bolts right in, you just need to open the bushings for the lower mount (top stock on a banshee) and mount it upside down. No clearance issues at all and almost and exact copy of the stock T3 shock, but with a much better feel... How long have you had the shee shock on your machine ? I just have concerns about using it upside down with the reservoir thing inverted. Anybody ???...

Hey guys. As some know I need a rear fender for my '87 kxt. I could get one for a '84/'85 for a good price. (Just like that .) Would that fender fit "more or less"? If I'd need to drill a few holes it won't hurt. The trike is just for riding.

Anyone know exactly what piston is used for the 300 kit? I thought there was a 330 kit for the tecate and you could stroke it to a 350? Could be all wifes tales?