Thread: Oil Change on Yamaha FZR600? - Yahoo! Answers

I know what Kind of oil to use(5w-30, says in the manual) also I do not know how many quarts to fill it in with....... Please let me know. Thanks

Yamaha says: 2.4 qts without filter change 2.7 qts With filter change 3.3 qts total capacity(such as after engine work which totally drains system) Also, the internet said 3.1qts for a YX600 radian which is just the earlier model (late 80's). On my 2002 sv650s and the 600 ninja i had before that, the number of mL's needed to fill the engine was stamped onto the side of the block near the oil filler cap. Try and look there too...

Just fill until it is full. It will come up to the top.

fill it so the oil level is in between the 2 lines on the site glass on the engine case, then start the bike & run it for a couple of min so the new oil gets around the engine & fills the oil filter then turn engine off top up to the top line on the site glass then run it again, turn off & check to see if the level is between the lines, if so thats it,