Thread: Liteon 83850c Hardware And Software Support Thread

QUOTE(inam22 @ Nov 22 2009, 12:16 AM) Same thing happened to me as well, ok here is the solution for you at least it worked for me.Do whole procedure again, when you get message to load auto firmware click yes and then next step click on save to file tap on your jungle flasher to save Lite_CFW.bin and then try to write your firmware by using this file rather than using auto firmware.I hope this will solve your problem. OK, so...

QUOTE(ROOSTRE @ Nov 4 2009, 07:31 PM) I have the drive in front of me now, it's mfr date is june 09 and the sticker says it is 83850c and 09c up top.

QUOTE(thesmash @ Sep 25 2009, 06:31 AM) I just bought a new arcade the other week with the 83850c. I'm not sure what I did but somewhere in the erase I think I screwed something up. I erase it and it just says drive returned status 0x80 then device intro failed. I'm just using the 360 as a power source right now. I've tried using the on/off switch on the box as well as unplugging and plugging in the dvd power...

As far as i know all june 83850's are flashable. You got the dedication string in jungleflasher so i think you are on the right track. Now you just got to get it twice in a row.

QUOTE(greatsave9 @ Aug 18 2009, 12:57 PM) I just tried to flash a newer Lite-On using the LO83 and the OpenKey.exe command prompt and all... Well I got the key, manually spoofed it, and flashed, and now I get an E66 as soon as the Xbox tries to load! I used Jungleflasher and didn't have any errors. Anyone else experience this? This is just like my problem, except mine works occasionally, i'm getting E65. I...

Does anyone try to dump - flash the new liteon fw-83850c with dosflash 1.8 and firmtool in clear dos? If it did then which is exactly the procedure to dump correctly the key with dosflash 1.8 in clear dos? Simply run the dosflash 1.8 with the tray of the liteon fw83850c half open and then you do full open tray without close the power of the drive? Which is the correct procedure of dumping the liteon fw-83850c firmware in clear dos(Not in any...

QUOTE(yanksrule421 @ Sep 5 2009, 10:30 AM) 83850c n by the way i have a dell optiplex gx280 with the via 6421 chipset in my rosewill pci card You do not need to solder or use the probe on the 8xxxx drives.

QUOTE(PornOH @ Sep 5 2009, 04:34 PM) You do not need to solder or use the probe on the 8xxxx drives. my bad i just found out i have a 7xxxx drive i do not want to solder or use the probe because i dont have one is there any other way

so i guess i got a bad key like everyone else i tried addiding my bin that i extracted with lo83 into fwz decrypter and it says bad AES KEY. so does that mean im completely screwed or is there another way someone can get my key from the generated bin i got from Lo83 that originally gave me the (140F0F1011B5223D79587717FFD9EC3A) bad key lmk thanx p.s i still have the 3 generated files from extractor tool not sure if that will help This post...

thanks for the response. I have tried ejecting it manually by moving the black thing across and then manually moving it out but this also doesn't work. Also tried powering the drive by every means I can think of.. Xbox, CK3, Maximus, Home made power supply I made up. Still cant get this to work. Might have to try another method I think. Other then Jungleflash. Thanks