Is it the one ohm or 4 ohm?
Seems either way the sub is better suited for a sealed box, though lanzar says 2 cf, looks like if the box is built for 3 cubic feet, the qtc ends up right at .85 after sub displacement and all....
What kind of space you workin with? L,W,H of available space and I could make you a cut list...
Thread: Enclosure Suggestions Please  |
|||||||||||||
|
Started 1 month, 1 week ago by kverskvfd
I currently have a Lanzar Optidrive 1532D, would like some suggestions on an enclosure. Max Dimensions would be 17H x 35W x 19D. Will be powered by an Opti2000D and will be my daily driver setup. Any suggestions are greatly appreciated.
|
|
||||||||||||
|
|||||||||||||
Other posts in this thread:
kverskvfd replied 1 month, 1 week ago
Its 2ohm DVC, my available space is in the first post and its being powered by an opti2000d @ 2 ohm. If you could post me up specs for a sealed and slot port box. I greatly appreciate it.
-Charlie-
Size: 212 bytes
Customize: 
ZeusVI replied 1 month, 1 week ago
First, I'll go with the sealed enclosure. Which I still believe on this sub is the right enclosure:
17x21x19 outer diameter using 3/4 inch material....
This would be a few1000ths over 3.0 cubic foot. If you are front or rear firing, go like this:
2 pcs - 17 x 21 - this makes the front and rear, cut speaker hole in one.
2 pcs - 17.5 x 17. this makes the sides.
2 pcs - 17...
Size: 637 bytes
Customize:
kverskvfd replied 1 month, 1 week ago
Thank you for your quick replies.
Size: 33 bytes
Customize:
ZeusVI replied 1 month ago
Ported,here's the problem. Lanzar says 2.0-2.5 ft^3 for box, and when I run the T/S numbers of that sub through the box pograms, they both agree that is too small a box for that sub. If the xmax(19mm) were cut in half it would help tremendously, but without the sub here I cant look and check the accuracy.
I roughed a box, slot ported, using your max dimensions, and it is on the small ...
Size: 1,163 bytes
Customize:
|
Top contributing authorsRelated threads on "Realm of Excursion: Forum":Related threads on other sites: |
||||||||||||
Thread profile page for "Enclosure Suggestions Please" on http://realmofexcursion.com.
This report page is a snippet summary view from a single thread "Enclosure Suggestions Please", located on the Message Board at http://realmofexcursion.com.
This thread profile page shows the thread statistics for: Total Authors, Total Thread Posts, and Thread Activity
Home |
About Us |
Submit Your Site |
Update Your Site |
Get Search For Your Site |
Partners |
Contact |
Search Plugin |
Blog |
 |
Last Searches | Top Searches |
Designated brands and trademarks are property of their respective owners.
Use of this website constitutes acceptance of BoardReader's User Agreement and Privacy Policy.