Thread: Alfa 331.5 Ti can i fit 1.7 Qv strate iin

That's what I meant. It's only the size that's different

Thanks

@supercharged16v, that's good enough to start with i guess, at the moment i've tried running one on rejetted 1.3 carbs, and i've got a feeling that its running a bit too lean that was on a friend's car by the way for myself i'll practice some trial and error to see which carbs are best, since i have every possible carb in stock , that's what happens if your hobby gets out of control lol in the past years i have...

Even if you have 36mm , changing venturis and needles you can have 40mm so no need to buy new bodies.

thanks for that Get to work then !

Yes. No problems with any of the carb cars. All external dimensions and bolt holes are the same.

Very true Greek,the 40mm tend to cough at low revs until the changeover to the main jets.I run that setup in my S2 33 now.Used a 1712cc from a 1988 Sprint with the 1490 qv box.Higher 5th gear means it's not revving it's guts out on the motorway;i.e 4000rpm @70mph in my old Sprint now is just over 3200rpm with the later 33 'box.