9006 plug n play connector | Thread profile

does anyone know where I can get or how to make these connectors for my HID kit instead of splicing into the stock 9006 harness so instead I can just plug into it...any info would be great

does anyone know where I can get or how to make these connectors for my HID kit instead of splicing into the stock 9006 harness so instead I can just plug into it...any info would be great

order them CP9006CM 9006 Male Plug with, includes housing and terminals @ http://www.rallylights.com/hella/Connectors.asp

Thanks, Coach .........but is there any way I can get them local or even make them myself

just cut up a spade plug and stick it in there. If you're doing things properly (a proper wiring harness which uses one of the stock 9006 connectors as a trigger wire, not a power feed wire), you'll be fine. I just shoved a wire into the stock connector and taped it up. edit: some reason I missed the part where you said it was an HID kit. This method probably won't be appealing then since ...

be a man, splice ur wires! be a pro, keep the 9k6 if u ever sell ur car

hrm... i need to do that soon

Or you can just hack up a dead 9006 bulb and solder wires to the contacts. That's what I did for mine.

rich... u lie!!! how did u pull that off? the contact points for the bulb where the filament sits is like resistent to the solder i used oh ffs. i used the OEM replacement crap from crappy btw, and i was angry when it didnt work so i had to splice :S

It's a real pain but you can get the solder to stick. I did that on my car for both highs and lows. I had to make my own harness when I was just using my JDM housings - H4 plugs for the low and H1 for the high.