Hardware | Forum profile

I was led to believe a .bli a JFFS which contains all of the file systems which is encrypted. Psi

Thanks everyone for the helpful comments and advice. I will let you know how things pan out. The complication for me is having to get to grips with the Mac as well (sadly I'm totally WINDOZ! through and through). Interesting experience though.

Ah! All this talk has stirred the gray matter! How about connecting it to a TV? Most TV's will take the output from a PC - I have even connected my laptop to our old (main TV) 28" Toshiba tube TV. Edit : Just re-read Austin_KW post above, might not be a good idea.

... Surely there must me a method of taking the signal to another machine via USB or something.... Originally Posted by geoffw You could buy 10 LCD monitors for the price of a VGA/DVI capture card. Using usb to output VGA is not too expensive. Using USB to capture VGA/DVI is very expensive (100s or 1000s of £s). There is a cheap work around if you video card outputs TV (composite or S-video) you can get a cheap TV capture card. Costs is...

one of the PCs here has no monitor on it and never had an issue using VNC, if something does go wrong you can always press the reset button VNC is built into tiger I think http://www.macminicolo.net/Mac_VNC_tutor.html ?

I have a BT home hub v1.0 but i cannot for the life of me unlock it. I have reset the router to its factory defaults. That means the username is 'admin' and the password is the hubs serial number. I downloaded the flash utility and the older firmware. The router is detected fine and I am prompted to entre the username and password. This takes me to a screen where I can choose a *.bin file. so I chose the old firmware. when I click...

Do you need a sipgate account - yes Have tried configuring sipgate and outgoing calls work fine. However, had no success with incoming calls. Tried both 5.29.107.19 and 5.29.117.6 firmware versions without luck. The device also registers with sipgate servers. Trying to call the device from the sipgate web interface does not work either. Any help would be greatly appreciated.

hey PSi i followed ur whole tutorial every thing went smooth after flashing now all lights turned red and when i connect ethernet cable i m unable to connect to modem no green lights and hub is restarting after every 10 min

Thanks for the comments folks. I think I will try the VNC route to start with but we are thinking of putting a small Flat Screen TV in the room where the mini mac and weather station receiver live so that might be an alternative. Originally Posted by geoffw If you do that, makesure that the screen will support a decent resolution of 1024 x 768, otherwise viewing stuff on the web in anything less is going to be a nightmare. Anothering thing to...

unless anyone knows someone who can create a Linux-Go bli image? If so PM me. Psi Originally Posted by PsiDOC isn't a bli image just a block level image of a file system?