Toyota Truck & 4Runner Tech | Forum profile

nice clean 4runner. looks good as is, put some sliders on to save your rockers. you'll know when more triming is required.

Quote: Originally Posted by xploded I'm looking to buy an 89-95 pickup but some have only a driver side mirror. How hard would it be to add one to the passenger side? I'd want to add one just like an original part. Not a different style aftermarket type. Has anyone done this? don't see why not...did it on a...

fill it up with premium now to dilut(how ever you spell it) and if that doesnt work change the fuel filter(changing it would be a good idea any how.

Are the bulbs burned out? Ummm ... yeah, replace them. If you need more light, add some auxiliary ones.

Quote: Originally Posted by the owl i started to dismantle my steering box so i could tap it and i ended up spilling the bearings from the worm drive... can i put some grease in there to hold the bearings in place as i replace the worm shaft? or do i have to drop them in as i work the shaft back in?? ...

Next, thread the shaft back into the piston until the threads start to appear at the at the lower port for the tube. You won't be able to get the bearings back in with the shaft all the way home as you need to work it in and let gravity help you a little bit to get the bearings settled in; I used the tang end of a file to help push the bearings in and found that turning the shaft...

F*&%$# newbie.

Nice color!!! Looks a little like mine.

Quote: Originally Posted by Zog I got the Diamond front axle in. Welded up the perches and shock mounts: So beautiful. Great build. Clean and very thought out

No more Taco, now I got a Runner This is what I have been working on for the last nine months. Let me know what you think. Before: After: Here is the build thread of how it got there. http://www.pgh-offroad.com/forum/showthread.php?t= 10689...

For the front or rear? If the front, do you already have one in the rear axle, and what is it? What kind of 'wheeling do you do, and what tire size are you going to be running? Are you doing an SAS because you're too abusive on equipment for the IFS?

Water pump is pretty easy, but while you are at it you might as well do the timing hcain setup too. Just a few more bolts and then you know it will be done. Get a kit from Engine Builder, he has some of the best kits around and they will have everythign that you need.

where and how bad is it bent? like have you had a wreck or what is it from?

cap and rotor?

here are a couple of pics of my new baby. Had one just like and totaled it 2 days after getting the lift on, got screwed by insurance, then lucked into this one for free with a blown motor.

Heres an updated one of mine. Just finished the axle swap about 3 weeks ago

i got a '91 pickup and the spindle bushings are worn. i saw this post on pirate where the 4runner guys used the DL94-001 TSB and swapped in some needle bearings to fix the problem. problem is i've searched parts.com and online but can't find this elusive needle bearing. anyone know anywhere online or have a link to these part numbers? Bearing = 90364-30011 Thrust Bushing = 90381-...

Quote: Originally Posted by the owl i started to dismantle my steering box so i could tap it and i ended up spilling the bearings from the worm drive... can i put some grease in there to hold the bearings in place as i replace the worm shaft? or do i have to drop them in as i work the shaft back in?? ...

F*&%$# newbie.

Quote: Originally Posted by Spacecwboy anyone installed the shock hoops that require you to cut the fenders? got any pics? im trying not to cut more than I have to so any help would be awesome My TrailGear tall hoops required "fender/firewall modification. I hacked the shit out of the fenders. I lucked out,...