Started 4 months, 3 weeks ago (2009-07-28 00:42:00)
by Ssicarman
Welcoem to the Board.
Glad that it worked out for you.
The how to is now edited for the coils and ignition module removal.
Started 9 months, 1 week ago (2009-03-10 18:32:00)
by matt88
Thanks for the how-to
i am just about to tackle an intake manifold gasket replacement on my 2002
SL1
the Hayes manual advises that you support the engine with a jack and rock it forward towards the radiator to access the manifold, it this necessary?
Started 2 months, 2 weeks ago (2009-10-01 05:43:00)
by RC1488
Year of the car?
Is the Security light flashing?
Started 1 month ago (2009-11-16 23:26:00)
by Ssicarman
Year, model and engine would be great to know. As would the actual code numbers not just the description of the code.
Started 1 month, 1 week ago (2009-11-07 23:34:00)
by Ssicarman
For the low air flow I would check the cabin filter to see if it is clogged up. It is located under the windshield
cowling. Open the hood and open up the hatch in the center of the cowling.
The not changing the flow postion I am not sure. I would start by removing the HVAC control head to see it you spot anyting wrong.
Started 1 month, 2 weeks ago (2009-10-31 20:02:00)
by redhotftw!
Bend the
number 85 pin out on the drl relay and put it back in. See if that fixes ur issue. The bent out pin will sit flush ontop of the fuse panel
Started 1 month, 4 weeks ago (2009-10-20 02:16:00)
by Ssicarman
Welcome to the Baord.
No idea what is causing your problem right now. Suggestions to check. Make sure that the connector for the PCM coolant temp sensor--the two wire one not the single wire one--is free of
corrosion. This is of course the sensor that you changed. Check the plugs and plug wires for carbon tracking at the opil soaked plug wells. Also check the plug wires at the coils for ...
Started 1 month, 3 weeks ago (2009-10-25 01:45:00)
by alipper
Rear
sunroof drains The rear sunroof drains are above the rear wheel well splash guards.
You have to remove the splash guard (about 9 of the pop-out body panel clips).
Also, the trim above the rear door (4 torx screws)
Finally, loosen the rear quarter panel (not nearly as big a deal as it sounds like. To do this, remove the rear tail light (2 torx screws on the trunk side of...
Size: 218 bytes
