Accord | Forum profile

if you have a CEL, it may be critical. I would check it before yuo do anything, who knows if it will end up being an expensive fix, you know? any autoparts store should be able to scan your code for free with their OBD2 scnners. if not, look up how to check online. I know on civics, tehy have a 2 pin wire connector near the ecu that doesnt do anything except chill in a green or gray rubebr thing. taking a paperclip or wire to shrot them, and...

Hmm.. what I'm nervous about is, what if you loosen that nut and the timing belt came loose then that would become a big problem if you start your engine. So I say take off all the timing belt covers and use one of the bolt cover and tighten down the timing belt arm so the belt won't come loose when you loosen that adjusting nut. After you got that timing tensioner bolt down tight, loosen the adjusting nut, and retighten it. That...

Bleeding the clutch is just like bleeding the brakes. Pump for pressure, hold pedal to floor , then crack the bleed screw open to purge the system, rinse repeat until only clear fluid runs out. Make sure your fluid resivior doesn't run dry as well.

Yeah I kinda figured the tranny fluid would need to be changed. The previous owner was a 36 year old woman and I doubt she ever had the fluid and filter changed. Is there a how to anywhere on bleeding the clutch reservoir? I never force shifts. Shifting just seems to take a little extra effort like its gummed up or something.

I can't be the only one from dear ol' Blighty on here with one of these cars!!! Can I? Get in touch.

lol almost leaking as in it looks as if it should be ha all or most the fins are bend pretty bad and its overall very rough shape. i see like $40 ones that are plastic tanks with lifetime warranty.. good choice im thinking

Quote: Originally Posted by Zendos thanks man, ill grab a kit and once i get it in ill let ya know whats up. Should i check the CEL code first anyways? in case there are more seals that are messed up. Bad seals do not activate CEL codes. Do you notice any blue smoke coming out of your exhaust when you take off after a stop sign/light? Also are you burning the oil or is it dripping off your block?

Well i just went and checked the codes. Seems like i have 3 Cylinder Misfires (Valve Cover Leaked into the 3) but as of right now i have my spark plugs, and the gasket, the gasket only came with the gasket itself. 1 pc. and Crankshaft Position Sensor, and i dont know where the hell that came from.

Quote: Originally Posted by nos.mike tigerjapanese.com thay like 650 a buddy of mine just got a h22a and trans from them for 750 + 180 to ship but that was trans too.... but becareful on the site it doesnt say anything about a harness so we asked and they said they do not typicly do it but since we requested it they said they would send the un-cut harness and NO harness came with it... but good price

Is this the Prelude driver side engine mount?