Sportster Models | Forum profile

Did you check your owners manual? Can you give a description of the wire and where it came from?

Thanks in advance for pictures!

more than likely an attachment for a battery tender

Never having fiddled with a rubber mounted sportster i dont know the answer to the moving the indicators but you had to take them off and reinstall on the pre 94 sportsters but on 94 to 03 the side plates had cutouts to fit round the indicator mounts would like to think that was carried forward but the racks are usually designed to work with us plates the uk ones are much bigger so they dont ...

get a wiring diagram check power and signal inputs aswell as ground, thats a start.

Quote: Originally Posted by Dynacologist Do they make a big bore or stroker kit for the 1200 to give it even more HP.Thinkin bout buildin a killer Sporty chop but want to give the ricers a run for the money.Any help is good.Thanks in advance,Dave... Set a budget on how much you want to spend then talk to Hobbit....

me i get around 6k to 9k on Avon Venoms which will be going on the bikes once the OEM has worn out, and im doing quite a good job of squaring the rear off nicely at 3K

i would get them blasted and re coated Black

Hi Matt, Welcome to the site, I'm a newbie as well, they are a great bunch of people on this site, no doubt you will enjoy it, as I am. Try EBC re the discs, they make all brake parts, I replaced the discs on my previous bike and had no problems, also they are made in the UK, so no problems getting hold of them and they are a lot cheaper as well, Cheers

as long as you have all the mounts and bolts to put them back on to the controls and enough wiring you will be fine, its literally a case of unbolting and running the wires back to stock locations, i dont remember but im sure they are not internally wired on the 1200N

me i get around 6k to 9k on Avon Venoms which will be going on the bikes once the OEM has worn out, and im doing quite a good job of squaring the rear off nicely at 3K

Quote: Originally Posted by Dynacologist Do they make a big bore or stroker kit for the 1200 to give it even more HP.Thinkin bout buildin a killer Sporty chop but want to give the ricers a run for the money.Any help is good.Thanks in advance,Dave... Set a budget on how much you want to spend then talk to Hobbit....

Thanks in advance for pictures!

Never having fiddled with a rubber mounted sportster i dont know the answer to the moving the indicators but you had to take them off and reinstall on the pre 94 sportsters but on 94 to 03 the side plates had cutouts to fit round the indicator mounts would like to think that was carried forward but the racks are usually designed to work with us plates the uk ones are much bigger so they dont ...

more than likely an attachment for a battery tender

i would get them blasted and re coated Black

Did you check your owners manual? Can you give a description of the wire and where it came from?

Re: gas tank Quote: Originally Posted by sward I am lookin for a fat bob tank for my spoty , any one got any ideas? Or better yet, anyone got one ready to mount??? usually the way it works, sward, is a new member introduces himself, says hello and ...

as long as you have all the mounts and bolts to put them back on to the controls and enough wiring you will be fine, its literally a case of unbolting and running the wires back to stock locations, i dont remember but im sure they are not internally wired on the 1200N

Try these Manual Alarm Disarming Procedure - Archive - Harley Davidson Community Programming / Using Manual Security Code (both FOB's) - Archive - Harley Davidson Community Here is the whole section on alarms Alarms and Security Related Issues - Harley Davidson Community