abit.care@HEXUS | Forum profile

please post full system specs. & describe what you consider a 2nd boot problem. If you completely power off any P35 mobo (other than an IP35 Pro where uGuru seems to take this over) it will always boot twice on restart - it's due to the way that the chipset works as it sets the strap.

Originally Posted by thomajar The BSOD is always different, but usually points towards the HDD's or RAID or SATA controller.. After the BIOS flash I reset it, and input all my settings again, I set it all up the same it's always been for the E6750, I'm not sure what the VMCH is, but I did input the memory timings and voltage (5 5 5 15 2T, @ 1.95V) The thing is, everything runs fine with the E6750 which runs at 333x8.0.. The...

Originally Posted by Biscuit IP35-E doesnt have E-Sata either, are you using a bracket theat plugs into one of the ports? If so the only way for it to work is for the hard drive to be plugged in prior to boot up Yes, I am using a header that plugs into an ordinary sata port on the board. Sadly, even with the drive up and running before I switch the PC on it's still not detected in the BIOS or in Windows

IP35-E doesnt have E-Sata either, are you using a bracket theat plugs into one of the ports? If so the only way for it to work is for the hard drive to be plugged in prior to boot up

Originally Posted by BUFF There is obviously though some means of telling the IP35-E BIOS setup not to display those fields referring to RAID/AHCI. Probably queries the southbridge to see what it is. If you really needed AHCI, what about a cheap adapter card? Although I notice you said youre getting an SSD, I wouldnt have thought AHCI would make a great deal of difference? The main benefits of AHCI vs IDE Emulation, from what I recall, are...

Originally Posted by BobF64 Probably queries the southbridge to see what it is. If you really needed AHCI, what about a cheap adapter card? Although I notice you said youre getting an SSD, I wouldnt have thought AHCI would make a great deal of difference? The main benefits of AHCI vs IDE Emulation, from what I recall, are more than 4 drives, support for NCQ and hot plugging. An adapter card was my next option; you don't happen to know of...

Hello guys. This is my first post on this forum, so don't go hard on me. Today I changed my E5200 M0 for an E8400 E0. Works fine, but iI discovered that there are some submenus missing from my BIOS, like the EIST option and the CPU Multiplier. I have the IP35 board, with BIOS 18, works fine @ 400x9, 1.25V CPU VID, but when I crank it up to FSB450 it freezes in Prime95 instantly, even with 1.35V. I read there is a 18 Beta BIOS for this...

Hi Anyone else overclocked an E4600 (M0) on an IP35 Pro XE? Just wondering what overclocks have been acheived and with what voltage settings. It seems mine is at 3.2ghz; vcore being 1.435. This seems a tad high to me. CPU VTT is 1.27 (from 1.20) and MCH is 1.31 (from 1.25). With the FSB at 266, does the latter two voltage settings affect anything? RAM is OCZ PC2-6400 ReaperX HPC, running at 2.1v at 5-5-5-15 at 1:2 ratio, resulting in 1066mhz....

Hi where are you all geting the new bios files from or even drivers as when i got to the abit site the files dont work now ?? and i dont have my cd any more for the drivers or utills sc00terx

hi artbio- thanks for the update. is that something i can reflash myself or do i need to replace chip on board? i know that under normal conditions i could flash the bios, but as the machine doesn't post doesn't seem as though this is possible...